Masonry connectors can be classified as wall ties, anchors or fasteners. Wall ties connect one masonry wythe to an adjacent wythe.

Anchors connect masonry to a structural support or frame. Fasteners connect an appliance to masonry. This TEK covers metal wall ties and anchors.

Masonry anchors to revive and stabilize our buildings. We help architects, engineers, contractors & owners return existing buildings to serviceability and ensure the stability of new buildings. Let us help save the wall of your next new construction or retrofit project.

• Concrete Wire Rolls are 6X6 AND IT 5' X 150' long to yield 750 SQ.FT.
• Steel wire welded in a grid pattern.
• Used to increase the tensile strength in concrete.

• Concrete Wire Sheets are 6X6, 5' X 10' long yielding 50 SQ.FT.
• Steel wire welded together in a square grid pattern
• It is used to increase the tensile strength in concrete.

IT COMES IN 20' SECTIONS AND WE ARE ABLE TO CUT DOWN TO ANY SIZE.
4X3X20' 1/4" , 3/8" , 1/2"
4x6x20' 1/4" , 3/8" , 1/2"

Galvanized Angle Iron is hot dipped in zinc rich liquid by the manufacturer to prevent the steel from eroding,
causing rust and expansion leading the brick and mortar to crack.
It is ideal for conditions that require greater strength and greater corrosion resistance.

Steel Angel Iron is used in a variety of projects because of its low cost, high strength, and ease of use.
Used for window and door footers, brick shelves, and steel connections.

AVAILABLE SIZES:
PRE-CUT SIZES ARE 3'-8' WITH 6" INCREMENTS IN 4" X 3" X 1/4".

4X3X20' 1/4"
4X3X20' 3/8"
4X3X20' 1/2"

4X6X20' 1/4"
4X6X20' 1/2"

AND ARE ABLE TO CUT DOWN TO ANY SIZE THE CUSTOMER LIKES.

Metal decking is a corrugated sheet metal that’s supported by steel joists or beams. Concrete is then poured on top of the metal deck and it becomes either a composite floor deck system or a steel form decking.

sizes available
4"
6"
8"
10"
12"
they all span 10'.

Durawall is used to increase resistance to future cracks and thermal/moisture expansion and contraction in your CMU Wall.

sizes
4" 1/4" Thick
6" 3'8" Thick
They are in 20' lengths and may be cut to any desired size.
They are mostly used for spans and shims for beams.

• C CHANNEL IS A C SHAPED STRUCTURAL STEEL THAT IS IDEAL FOR ALL STRUCTURAL APPLICATIONS. EASY TO CUT, WELD, AND BOLT. GREAT FOR VERTICAL AND HORIZONTAL LOADS.

• I BEAMS AND WIDE FLANGE BEAMS ARE BOTH AVAILABLE. I BEAMS ARE A I SHAPED STRUCTURAL STEEL THAT IS IDEAL FOR ALL STRUCTURAL APPLICATIONS. EASY TO CUT, WELD, AND BOLT. GREAT FOR VERTICAL AND HORIZONTAL LOADS.

• CIRCULAR TUBE/LOLLYCOLUMN IS A CIRCULAR SHAPED STRUCTURAL STEEL THAT IS IDEAL FOR ALL STRUCTURAL APPLICATIONS. EASY TO CUT, WELD, AND BOLT. GREAT FOR COLUMN SUPPORTS BOTH HOLLOW AND CONCRETE FILLED. PLATING IS AVAILABLE.

• SQUARE STRUCTURAL TUBE IS A SQUARE SHAPED STRUCTURAL STEEL THAT IS IDEAL FOR ALL STRUCTURAL APPLICATIONS. EASY TO CUT, WELD, AND BOLT. GREAT FOR COLUMN SUPPORTS BOTH HOLLOW AND CONCRETE FILLED. PLATING IS AVAILABLE.

Rebar is used to strengthen concretes tensile strength to prevent slabs, columns, and decks from cracking and failing.

They come 20' long and 10'and we can cut to any size.
The Regualar Rebar:

#3 3/8"
#4 1/2"
#5 5/8"
#6 3/4"
#8 1"

They come 20' long and we can cut to any size.
Epoxy Rebar"

#4 1/2"
#5 5/8"

Available in 22 and 28 Gauge in 50 PC. and 500 PC. Bundles.
Wall ties also known as Brick Ties are used to attach cavity walls to allow them to act as one ensuring greater strength and stability.

Steel Wire Mesh is used for stucco, interior tile, and stone veneer applications. It reduces cracking by maintaining a uniform palette of cement and plaster, also used for scratch coats before installing stone veneer or brick panels. They are approximately 2’ x 8’ and are sold individually or in bundles of 10.